Skip to content

Artificial privacy hedge on a Brentwood hillside deck

A Brentwood homeowner had two problems: an eroded hillside that looked terrible from the deck, and very little privacy from the neighbors.

See the photographs
A tall artificial privacy hedge running the length of a Brentwood deck, blocking the view from the neighbors
Along the deck, at a consistent 6 ft.
Job
Brentwood hillside deck
Place
Brentwood, Los Angeles
Year
2019
Size
600 sq ft
Height
A consistent 6 ft
Timeline
3 weeks, kickoff to completion
Mounting
Galvanized square tube posts, set in concrete on the hillside

The problem.

The slope created two separate zones: the west side of the deck overlooked an eroded, barren hillside that undermined what was otherwise high-end landscaping. The south side, where the homeowner liked to spend evenings, had clear sightlines to the neighbor’s home and their windows.

The answer.

We proposed a two-zone artificial hedge installation: one section to cover and disguise the eroded hillside (creating a natural-looking green “wall” from inside the house), and another along the south property line to create privacy for the seating area.

The photographs.

Two more photographs from the job.

  1. The artificial privacy hedge running below the eroded hillside at the Brentwood property
    Below the eroded hillside.
  2. An installer fitting artificial hedge panels on the Brentwood deck, rolls of hedge on a tarp beside him
    Fitting the panels on the deck.

What we built.

An artificial privacy hedge is a dense screening system used where a project needs a hedge look with immediate coverage and controlled maintenance.

Illustrative section. The hedge at its consistent 6 ft, its sheets on a galvanized square tube post set in concrete. Post size and footing depth are not to scale.

Artificial privacy hedge

Material, from $99 per linear ft on your fence or wall, or from $200 per linear ft freestanding at 6 ft × 7 in, + installation, priced to your site.

Posts in concrete

One of the five ways to privacy. The site: Open ground, no fence.

A privacy hedge on square tube posts set in concrete, the hedge sheets mounted to them. Permanent: once the posts are set, it stays where it stands.

The full case study.

Setting
Residential
Year
2019
Written up
January 20, 2026
Specified
UV-resistant materials, galvanized post mounting

A Brentwood homeowner had two problems: an eroded hillside that looked terrible from the deck, and very little privacy from the neighbors. Califauxscapes designed and installed 600 square feet of UV-resistant hedges to screen both. The whole project took three weeks.

Overview

High-end residential properties in Brentwood often sit on slopes that either expose the neighbors or create odd blind spots from the main living areas. This property had both: a steeply eroded hillside visible from the master bedroom deck, and almost no privacy on the south side where the main outdoor seating area faced a nearby neighbor’s bedroom windows.

The homeowner wanted something that would look like a permanent upgrade to the property (not a patch or temporary fix), would block views immediately, and wouldn’t require watering, pruning, or seasonal care. Califauxscapes recommended a 600 square foot artificial hedge solution using UV-stabilized materials for long-term color and durability.

The challenge

The slope created two separate zones: the west side of the deck overlooked an eroded, barren hillside that undermined what was otherwise high-end landscaping. The south side, where the homeowner liked to spend evenings, had clear sightlines to the neighbor’s home and their windows. The solution had to work at scale without looking like it was installed in sections or phases.

The homeowner also wanted the hedge to look built into the property, not like a temporary addition. That meant clean attachment points, consistent height, and no gaps or misalignment. Since this was a high-end property, the final look mattered as much as the function.

Our solution

We proposed a two-zone artificial hedge installation: one section to cover and disguise the eroded hillside (creating a natural-looking green “wall” from inside the house), and another along the south property line to create privacy for the seating area.

We specified UV-resistant materials, made to slow fading in direct sun. We also planned the attachment method upfront: using galvanized square tube posts set in concrete on the hillside to mount hedge panels so they’d be secure and visually seamless.

The design called for a consistent 6-foot height across both zones so it would read as one unified privacy solution, not two separate installations.

Implementation

We started with a site survey to confirm the slope of the hillside and the sightlines from both the home’s interior and the seating area. This let us map where posts would be anchored and how to orient the hedge panels for maximum privacy and visual impact.

Custom-cut hedge panels were fabricated offsite to match the slope and length of each zone. On installation day, we installed the galvanized posts first, then mounted the hedge panels with careful alignment so seams would be minimal and consistent.

The whole project took three weeks from kickoff to completion, including site surveying, material prep, and final install.

Results

The hillside behind the west side of the deck is now a dense green backdrop that looks like thoughtful landscaping, not a remedial cover-up. From inside the house, the eroded slope has disappeared from view, replaced by lush artificial foliage that complements the interior décor.

On the south side, the privacy hedge created a clear boundary between the homeowner’s seating area and the neighbor’s space. The height and density block direct sightlines while maintaining the overall aesthetic of the backyard. The hedge looks permanent and intentional, not temporary or makeshift.

With UV-stabilized materials, the color should remain vibrant for many seasons with no watering, pruning, or seasonal swaps. The homeowner got the privacy they wanted, the look they envisioned, and a low-maintenance solution that actually stays looking good.

More jobs like this.

Two more privacy hedges first, then the other ways to privacy.

  1. Two tall artificial boxwood privacy hedges on wood bases flanking the steps up to a Brentwood deckArtificial boxwood hedge panels on wood bases lining a Brentwood deck, with the lawn beyond

    Brentwood jacuzzi deck

    Place
    Brentwood
    Mounting
    Custom plates drilled into the decking
    Year
    2020
    The case study: Artificial boxwood hedges for backyard privacy in Brentwood, CA
  2. Artificial boxwood hedge screen around the LA Golf rooftop lounge in Los Angeles, hiding the AC units from the seating

    LA Golf rooftop

    Place
    Los Angeles
    Size
    300 sq ft
    Mounting
    Anchored to the parapet, no roof penetrations
    Install
    Within a three-week deadline
    Year
    2023
    The case study: LA Golf rooftop: 300 sq ft of artificial hedges to hide AC units and add privacy
  3. Faux boxwood panels mounted on top of an existing block wall along a Downtown LA patio, screening it from the streetThe same artificial boxwood hedge from the street, rising above the block wall behind its metal railing

    A hedge fence extension on a Downtown LA block wall

    Place
    Los Angeles
    Mounted on
    The block wall and metal railing already there
    Install
    Two weeks
    Year
    2019
    The case study: Downtown LA: artificial hedges mounted on an existing block wall for instant privacy
  4. A freestanding artificial boxwood unit on its custom composite base, on a tiled terrace at the Jamul casinoArtificial boxwood units on their custom composite base, turning a corner at the Jamul casino

    Jamul casino

    Place
    Jamul
    Base
    Custom composite base
    Year
    2024
    The case study: Custom artificial boxwood hedges for a casino in Jamul, CA
  5. Artificial boxwood units on locking casters arranged around the courtyard fountain at The Prado at Balboa ParkA wedding party in The Prado courtyard at Balboa Park, San Diego, with faux boxwood hedges on locking casters behind them

    The Prado at Balboa Park

    Place
    San Diego
    Base
    Locking casters
    Year
    2025
    The case study: The Prado at Balboa Park: custom mobile hedges that replaced an expensive rental cycle
  6. Four artificial boxwood units on locking casters in a row on the L’Auberge Del Mar event deckOne artificial boxwood unit on locking casters on the L’Auberge Del Mar deck, above the pool

    L’Auberge Del Mar

    Place
    Del Mar
    Base
    Weighted, on locking casters
    Year
    2023
    The case study: L'Auberge Del Mar: mobile artificial hedges for oceanfront wedding privacy

Your wall next?Every job in the file

Send us a wall like this.

Brentwood hillside deck, or something like it? Tell us where yours is, roughly how big and what it needs to hide. Attach photos here, or we’ll ask for them. We reply with next steps.

(760) 978-7335
  1. A quick callAbout your wall and what it needs to hide.
  2. Online site reviewA render on your photo, with an intro estimate.
  3. Free site visitIn Southern California, for the final estimate. No obligation.

No photos or measurements needed to start. A rough idea is enough.

Fields marked * are required

What would you like built?

Material, from $99 per linear ft on your fence or wall, or from $200 per linear ft freestanding at 6 ft × 7 in, + installation, priced to your site.

Height, length, what it needs to hide.

Add photos0 of 2

Up to 2 photos. A wide shot of the whole wall helps most. Have more? Send the rest when we get back to you.

By sending, you agree to our Terms of Service and Privacy Policy, and that we may call, text or email you about your request.

Book a 15-min call